Securing The Access Point To The Mounting Plate - Cisco 521 Manual

Securing the Access Point to the Mounting Plate

The mounting plate provides two methods of securing your access point to
restrict its removal:
1. You can use the security hasp adapter (supplied) and a padlock that you
provide to secure your access point. Compatible padlocks are Master
Lock models 120T or 121T.
2. You can use the 8 x 32 x 3/16 in. pan head screws (provided) or a
tamper-resistant head screw that you provide to attach the access point
to the mounting plate using the security screw hole.
Follow these steps to install the security hasp adapter:
Step 1
Open the access point cover.
Step 2 Carefully tilt the security hasp adapter and insert the access point
security hasp tab into the notch on the security hasp adapter as
shown in the following illustration.
Quick Start Guide: Cisco 521 Wireless Express Access Point
25