Safety Information - Cisco 521 Manual

Safety Information

The FCC, with its action in ET Docket 96-8, has adopted a safety standard for
human exposure to RF electromagnetic energy emitted by FCC-certified
equipment. Cisco 521 access points meet the uncontrolled environmental
limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio
device according to the instructions in this document and the installation and
configuration guide will result in user exposure substantially below the FCC
recommended limits.
• Do not hold any component containing a radio such that the antenna is
very close to or touching any exposed parts of the body, especially the
face or eyes, while transmitting.
•
The use of wireless devices in hazardous locations is limited to the
constraints posed by the safety directors of such environments.
Warnings
Warning
This product must be connected to a Power-over-Ethernet
(PoE) IEEE 802.3af compliant power source or an IEC60950
compliant limited power source.
4
OL-16715-01