Cisco 521 Manual page 22

Mounting on a Desktop or Shelf
When placing the access point on a desktop or shelf, you do not need the
mounting plate. The access point has four rubber pads on the bottom to help
prevent it from sliding on or scratching the surface of your desktop or shelf.
Attaching the Access Point to the Mounting
Plate
Follow these steps to attach the access point to the mounting plate:
Step 1 Open the access point cover.
Step 2 In the cable bay area, pull the cables through the access point cable
opening.
Step 3 In the cable bay area, line up the visible access point keyhole with
the mounting plate keyhole clip located near the security padlock
hole as shown in the following illustration.
22
OL-16715-01