Obihai OBi110 Administration Manual page 169

File Sharing Parameter Guide:
Parameter
File Sharing
EnableAccessFromWAN
Anonymous User
Enable
HomeDirectory
FileFilter
User N (N = 1 – 10)
Enable
UserID
Description
While accessing files on the attached USB storage
device from the LAN side of the OBi is always
enabled, accessing the files from the WAN side
may be disabled. By enabling this option you allow
access to the files from the WAN side. This option
applies to all levels of access (admin, user, and
anonymous).
Note: If this option is disabled, you will be denied
from accessing the files from the WAN when you
click on the File Explorer link on the device web
page even if you have logged in as the admin.
Note: This option needs a reboot for this change to
take effect
By enabling this option, you allow anonymous
(read-only) access to the files on the USB storage
device., using this link:
http://<obi-address>/obi_share/anonymous
The user will be challenged to enter any UserID or
Password in this case.
The Home Directory for anonymous level access,
such that user cannot navigate the file system
above this directory.
Maximum length of this field is 256 characters.
Note: A blank value is same as slash (/) which
allows navigation all the way to the root of the file
system
A list of semicolon (;) separated filename filters to
limit the type of filtes this user can see. Each filter
MUST be of the format:
*.<file-type>
Where <file-type> is a literal string (no wildcards or
space), such as jpg, pdf, mp3, etc., and * is a
wildcard that matches any valid filename string.
For example: *.jpg; *.pdf; *.mp3; *.mov
Maximum length of this field is 256 characters.
Allow users to login for file sharing with the UserID
and Password for User N
UserID is case sensitive. It must be an
alphanumeric string, must not start with a number,
and must not contain any space.
Maximum length is 64 characters.
Copyright 2010-2012 Obihai Technology, Inc.
Default Setting
Yes
No
/obi_share/anonymous
*
No
userN
169