Obihai OBi110 Administration Manual page 163

Code17 Default = Do Not Disturb Star Code
Code18 Default = Disable Do Not Disturb Star Code
Code19 Default = Repeat Dial Star Code
Code20 Default = Disable Repeat Dial Star Code
Code21 Default = Set Speed Dial Star Code
Code22 Default = Check Speed Dial Star Code
Code23 Default = Loopback Media Star Code
Code24 Default = Loopback RTP Star Code
Code25 Default = Force G711u Codec Star Code
Code26 Default = Force G729 Codec Star Code
Code27 Default = Clear Speed Dial Star Code
Code28 Default = Blind Transfer Star Code
Code29 Default = Barge In Star Code
Code30 Default = OBiBT Discoverable Star Code
(OBi202 and OBi302 only)
Code31 Default = Set OBiPLUS to Day Mode Star Code
Code32 Default = Set OBiPLUS to Night Mode Star
Code
Code33 Default = Set OBiPLUS to Auto Night Mode
Star Code
Code34
Code35
Code36
Code37
Code38
Code39
Code40
Note: Code31 – Code40 requires subscription to OBiPLUS Service
Copyright 2010-2012 Obihai Technology, Inc.
*78, Do Not Disturb, set($Dnd,1)
*79, Disable DND, set($Dnd,0)
*66, Repeat Dial, rpdi($Ldn)
*86, Disable Repeat Dial, rpdi
*74(x|xx), Set Speed Dial, coll($Spd[$Code])
*75(x|xx), Check Speed Dial, say($Spd[$Code])
*03, Loopback Media, set($Lbm1,1)
*04, Loopback RTP Packet, set($Lbp1,1)
*4711, Use G711 Only, set($Cdm1,3)
*4729, Use G729 Only, set($Cdm1,4)
*76([1-9]|[1-9]x), Clear Speed Dial,
set($Spd[$Code],)
*98, Blind Transfer, coll($Bxrn)
*96, Barge In, set($Bar1,1)
*28, OBiBT Discoverable, btdscvr()
*10, Day Mode, set($Opm,0)
*11, Night Mode, set($Opm,1)
*12, Auto Night Mode, set($Opm,2)
163