Cisco TelePresence System Quick Set C20 Administrator's Manual page 67

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents Introduction
Experimental SystemUnit CrashReporting Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Off/On>
Example: Experimental SystemUnit CrashReporting Mode: Off
Experimental SystemUnit CrashReporting URI
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <S: 0, 255>
Example: Experimental SystemUnit CrashReporting URI: ""
D14637.08 Profile C20 and Quick Set C20 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings
67
Password protection Appendices
Administrator guide
Contact us
www.cisco.com