Cisco TelePresence System Quick Set C20 Administrator's Manual page 62

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents Introduction
Video Layout RemoteLayoutFamily
Select which video layout family to be used for the remote participants.
Requires user role: ADMIN
Value space: <Auto/FullScreen/Equal/PresentationSmallSpeaker/
PresentationLargeSpeaker>
Auto: The default layout family, as given by the local layout database, will be used as the remote
layout. For more information about the layout database, see the command: xCommand Video
Layout LoadDb.
FullScreen: The FullScreen layout family will be used as the remote layout.
Equal: The Equal layout family will be used as the remote layout.
PresentationSmallSpeaker: The PresentationSmallSpeaker layout family will be used as the
remote layout.
PresentationLargeSpeaker: The PresentationLargeSpeaker layout family will be used as the
remote layout.
Example: Video Layout RemoteLayoutFamily: Auto
Video MainVideoSource
Define which video input source shall be used as the main video source. The video input source is
configured with the "Video Input Source [1..2] Connector" setting.
Requires user role: USER
Value space: <1/2>
Range: Select the source to be used as the main video source.
Example: Video MainVideoSource: 1
Video Monitors
Set the monitor layout mode.
Requires user role: ADMIN
Value space: <Single/Dual/DualPresentationOnly>
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Example: Video Monitors: Single
D14637.08 Profile C20 and Quick Set C20 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings
Video OSD Mode
The Video OSD (On Screen Display) Mode lets you define if information and icons should be
displayed on screen.
Requires user role: ADMIN
Value space: <On/Off/Disabled>
Example: Video OSD Mode: On
Video OSD AutoSelectPresentationSource
Determine if the presentation source should be automatically selected.
Requires user role: ADMIN
Value space: <On/Off>
Example: Video OSD AutoSelectPresentationSource: Off
Video OSD TodaysBookings
This setting can be used to display the systems bookings for today on the main OSD menu. This
requires that the system is bookable by an external booking system, like Cisco TelePresence
Management Suite (TMS).
Requires user role: ADMIN
Value space: <On/Off>
Example: Video OSD TodaysBookings: Off
Video OSD MyContactsExpanded
Set how the local contacts will be displayed in the phone book dialog in the OSD (On Screen
Display).
Requires user role: ADMIN
Value space: <On/Off>
Example: Video OSD MyContactsExpanded: Off
62
Password protection
On: Display the on screen menus, icons and indicators.
Off: Hide the on screen menus, icons and indicators.
Disabled: When set to disabled, the C20 can use the additional resources usually used by
the GUI to do 1080p30 at the same time as sharing a presentation. The C20 must then be
controlled by a Cisco TelePresence Touch or and external control panel as the GUI will be
disabled.
On: Enable automatic selection of the presentation source.
Off: Disable automatic selection of the presentation source.
On: Displays information about this systems bookings on screen.
Off: Do not display todays bookings.
On: The local contacts in the phone book will be shown in the top level of the phonebook dialog.
Off: The local contacts will be placed in a separate folder called MyContacts in the phonebook
dialog.
Administrator guide
Appendices Contact us
www.cisco.com