Cisco TelePresence System Quick Set C20 Administrator's Manual page 48

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents Introduction
NetworkServices HTTP Mode
Set the HTTP mode to enable/disable access to the system through a web browser. The web
interface is used for system management, call management such as call transfer, diagnostics and
software uploads.
Requires user role: ADMIN
Value space: <On/Off>
On: The HTTP protocol is enabled.
Off: The HTTP protocol is disabled.
Example: NetworkServices HTTP Mode: On
NetworkServices HTTPS Mode
HTTPS is a web protocol that encrypts and decrypts user page requests as well as the pages that
are returned by the web server.
Requires user role: ADMIN
Value space: <On/Off>
On: The HTTPS protocol is enabled.
Off: The HTTPS protocol is disabled.
Example: NetworkServices HTTPS Mode: On
NetworkServices HTTPS VerifyServerCertificate
When the system connects to an external HTTPS server (like a phonebook server or an external
manager), this server will present a certificate to the system to identify itself.
Requires user role: ADMIN
Value space: <On/Off>
On: Requires the system to verify that the server certificate is signed by a trusted Certificate
Authority (CA). This requires that a list of trusted CAs are uploaded to the system in advance.
Off: Do not verify server certificates.
Example: NetworkServices HTTPS VerifyServerCertificate: Off
NetworkServices HTTPS VerifyClientCertificate
When the system connects to a HTTPS client (like a web browser), the client can be asked to
present a certificate to the system to identify itself.
Requires user role: ADMIN
Value space: <On/Off>
On: Requires the client to present a certificate that is signed by a trusted Certificate Authority
(CA). This requires that a list of trusted CAs are uploaded to the system in advance.
Off: Do not verify client certificates.
Example: NetworkServices HTTPS VerifyClientCertificate: Off
D14637.08 Profile C20 and Quick Set C20 Administrator Guide TC5.1, February 2012.
Copyright © 2010-2012 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings
NetworkServices HTTPS OCSP Mode
Define the support for OCSP (Online Certificate Status Protocol) responder services. The OCSP
feature allows users to enable OCSP instead of certificate revocation lists (CRLs) to check
certificate status.
Requires user role: ADMIN
Value space: <Off/On>
Example: NetworkServices HTTPS OCSP Mode: Off
NetworkServices HTTPS OCSP URL
Specify the URL of an OCSP server.
Requires user role: ADMIN
Value space: <S: 0, 255>
Example: NetworkServices HTTPS OCSP URL: "http://ocspserver.company.com:81"
NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the time of the system to a reference
time server. The time server will subsequently be queried every 24th hour for time updates.
The time will be displayed on the top of the screen. The system will use the time to timestamp
messages transmitted to Gatekeepers or Border Controllers requiring H.235 authentication. The
system will use the time to timestamp messages transmitted to Gatekeepers or Border Controllers
that requires H.235 authentication. It is also used for timestamping Placed Calls, Missed Calls and
Received Calls.
Requires user role: ADMIN
Value space: <Off/Auto/Manual>
Example: NetworkServices NTP Mode: Manual
NetworkServices NTP Address
Enter the NTP Address to define the network time protocol server address. This address will be
used if NTP Mode is set to Manual, or if set to Auto and no address is supplied by a DHCP server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Example: NetworkServices NTP Address: "1.ntp.tandberg.com"
48
Password protection
Off: Disable OCSP support.
On: Enable OCSP support.
Format: String with a maximum of 255 characters.
Off: The system will not use an NTP server.
Auto: The system will use the NTP server, by which address is supplied from the DHCP server in
the network. If no DHCP server is used, or the DHCP server does not provide the system with a
NTP server address, the system will use the static defined NTP server address specified by the
user.
Manual: The system will always use the static defined NTP server address specified by the user.
Format: String with a maximum of 64 characters.
Administrator guide
Appendices Contact us
www.cisco.com