Standby Confirmation Message - Digicom Pocket AL I/O User Manual

Pocket AL I/O

3.8.3. Standby confirmation message

The enabling and disabling of STANDBY status must be confirmed with an SMS message; Pocket AL I/O will send it only to the
authorized user that requested it.
• Pocket AL I/O ID
• Status
STATUS: ON (Pocket AL I/O enabled, that is in the operative status)
STATUS: OFF (Pocket AL I/O disabled, that is in Standby)
Examples of confirmation messages
Pocket AL I/O enabled
HOME
STATUS: ON
Pocket AL I/O disabled
HOME
STATUS: OFF
If you do not want to receive the notification of enabled/disabled, you must send the following messages:
#ENABLE,N#
#DISABLE,N#
3.12
It enables Pocket AL I/O operative status (STANDBY disabled)
It disables Pocket AL I/O (STANDBY enabled)
Configuration