Table of Contents
Advertisement
Pocket AL I/O
Configuration
3. CONFIGURATION
Pocket AL I/O is setup with simple configuration commands through the RS232 serial interface (terminal emulator set at 115200bps,
8, N,1) or through SMS messages using a standard mobile phone, to the SIM card number inserted in Pocket AL I/O.
In order to guarantee the security in the use of the device/application it is foreseen the configuration of users (cellular numbers)
authorized to the device setup. For this reason it is important to perform this operation first and to define the list of authorized
users.
Here following the screens concerning the configuration of Hyperterminal emulator. To correctly display the answer messages of
Pocket AL I/O it is important to set in the "ASCII setup" the item "Append line feeds to incoming line ends".
3.1
Advertisement
Table of Contents
