Table of Contents
Advertisement
Pocket AL I/O
3.3. STARTING CONfIGURATION
3.3.1. Authorized users configuration
It defines the list of users authorized to set the device via SMS. Up to six users can be inserted. As default all numbers are
authorized.
Command:
#
ACCLIST
#
USER 1
Description:
NAME
VALUE
ACCLIST
ACCLIST
User 1,n,6
+ 0..9
NOTES
1. If you want to add a number to a set list, it will be necessary to insert all the numbers again.
2. "0" (zero) character inserted in User1 will cancel all the list.
3. If the User field is empty, anyone will be able to set and manage the device.
4. Default:
User = empty
EXAMPLES
#ACCLIST#+393351234567#+393409876543#
#ACCLIST#0#
3.3.2. Configuration of device ID
It allows the configuration of the device ID. This will be inserted in all the messages sent by Pocket AL I/O to allow the user receiving
the SMS to recognize the sender.
Command:
#
0
#
Description:
NAME
VALUE
0
0
ID
A..Z,a..z,
0..9
EXAMPLES
#0#HOME#
3.3.3. How to modify the configuration
After setting a contact, it might be necessary to change a field in the configuration (alarm name, phone numbers, etc.). To do this,
it is necessary to send the new configuration that will overwrite the old one. If the single contact is not used anymore, then it is
enough to send the message #chiave#
NAME
VALUE
key
1..15
99
EXAMPLES
#2# (to cancel key 2 configuration)
#99# (to cancel the whole configuration)
#
USER 2 #
DESCRIPTION
Key for the configuration of users enabled to the device management
Phone numbers of users enabled to the device setting (up to six numbers can be inserted)
ID
#
DESCRIPTION
Key of Pocket AL I/O ID
ID associated to the contact (20 characters maximum; "#" and space characters not
accepted in the ID field)
DESCRIPTION
Device contacts key for which the cancellation of the configuration is requested
It cancels the whole configuration
USER 3
#
USER 4
Configuration
#
USER 5
# USER 6
#
3.3
Advertisement
Table of Contents
