Honeywell UDC3500 Product Manual page 153

Function Prompt
Lower Display
NOTE 1: If PV source is one of the Analog Inputs, then the SP HiLIM and SP LoLIM values must be
between the Input High and Input Low values for the input type configured. If the PV source is an Input
Algorithm configured for:
•
Carbon Potential, then the SP HiLIM and SP LoLIM values must be between 0.000 and 2.000
•
Dewpoint, then the SP HiLIM and SP LoLIM values must be between –50 and +100
•
Oxygen, then the SP HiLIM and SP LoLIM values must be between 0 to 40.00
•
Weighted Average, Summer, Subtractor, High or Low, then the SP HiLIM and SP LoLIM values
must be between the configured CALC HI and CALC LOW values. CALC HI and CALC LOW can
be set anywhere between –999 and 9999.
•
Math A, Math B, Math C or Math D, then the SP HiLIM and SP LoLIM values can be set
anywhere between –999 and 9999 and are not limited to the CALC HI and CALC LOW values.
10/05
Selections or
Range of Setting
Upper Display
UDC3500 Universal Digital Controller Product Manual
Configuration
Parameter
Definition
139