Honeywell OMNI 624 Installation And Setup Manual page 61

Q 14, L3 – Enter the L3 digit from the table below.
L3 Disable Arm Disable Arm
Entry Partition 1
0
✔
1
2
✔
3
✔
5
6
✔
7
8
✔
9
A
✔
B
C
✔
D
E
✔
F
Q 14, L4 – Enter the L4 digit from the table below.
L4 Quick Force
Entry Arm Arm
0
✔
1
✔
2
✔ ✔
3
4
✔
5
✔
6
✔ ✔
7
8
✔
9
✔
A
✔ ✔
B
C
✔
D
✔
E
✔ ✔
F
U L
Quick Exit must not be enabled for UL installations.
Exit
Disable Arming: If selected, the respective partition
Partition 2 Extends
cannot be armed. See Submode 2, Question 48, L1/L2
for entering the report code (must be "DD") that is sent
if a user attempts to arm the system after this option
✔
has been set.
✔
Exit Extends: If selected, re-entering the premises
during the exit delay time will restart the exit delay
✔
timer, allowing someone to exit again without having to
✔
disarm, then rearm the system. This can only occur
✔
once during an armed period. See Question 14, L4 for
✔
related Quick Exit feature.
✔ ✔
✔ ✔
✔
✔
✔ ✔
✔ ✔
Quick Arm: If selected, Quick Command #1 will arm if
Quick Quick
Exit Bypass
the system is ready. When you are using the ADEMCO
Contact ID reporting format and Quick Arm is enabled, a
Contact ID code of 408 with a user number of 128 is sent
to the central station when the system is armed using the
Quick Arm feature.
Force Arm: If selected, Quick Command #2 will arm the
✔
system and bypass any faulted zones. When you are using
✔
the ADEMCO Contact ID reporting format and Force Arm
✔
is enabled, a Contact ID code of 408 with a user number of
✔
127 is sent to the central station when the system is
✔
armed using the Force Arm feature.
✔
Quick Exit: Allows the user to leave the premises while
✔
the system is armed by pressing the [STAY] key, which
✔ restarts the exit delay timer. This way the user does not
have to first disarm the system, then re-arm it again to
✔ ✔
leave.
✔ ✔
Quick Bypass: Allows the user to bypass zones without
✔ ✔
first using the user code.
✔ ✔
Section 6. System Programming
Exit Extends must not be enabled for UL
U L
installations.
6–23