Specifying Options That Appear On The User Options Web Pages - Cisco 6921 Administration Manual

Managing the User Options Web Pages
Choose the device that you want to associate with the end user by checking the box to the left of the
Step 5
device.
Step 6 Click Save Selected/Changes to associate the device with the end user.
From Related Links drop-down list box in the upper, right corner of the window, select Back to User,
Step 7
and click Go.
The End User Configuration window displays and the associated devices that you chose display in the
Controlled Devices pane.
Step 8 Click Save Selected/Changes.
Make sure to provide end users with the following information about the User Options web pages:
The URL required to access the application. This URL is:
•
For additional information, see the following:
•
•

Specifying Options that Appear on the User Options Web Pages

Most options that are on the User Options web pages appear by default. However, the following options
must be set by the system administrator by using Enterprise Parameters Configuration settings in Cisco
Unified Communications Manager Administration:
•
•
•
The settings apply to all User Options web pages at your site.
Note
To specify the options that appear on the User Options web pages, follow these steps:
Procedure
From Cisco Unified Communications Manager Administration, choose System > Enterprise
Step 1
Parameters.
The Enterprise Parameters Configuration window appears.
In the CCMUser Parameters area, specify whether a parameter appears on the User Options web pages
Step 2
by choosing one of these values from the Parameter Value drop-down list box for the parameter:
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
5-22
http://<server_name:portnumber>/ccmuser/, where server_name is the host name of the
Cisco Unified Communications Manager.
A user ID and default password are needed to access the application.
These settings correspond to the values you entered when you added the user to Cisco Unified
Communications Manager (see the
section on page 5-20).
Cisco Unified Communications Manager Administration Guide,
Cisco Unified Communications Manager Administration Guide,
Show Ring Settings
Show Line Text Label Settings
Show Call Forwarding
Chapter 5 Configuring Features, Templates, Services, and Users
"Adding Users to Cisco Unified Communications Manager"
User Group Configuration.
End User Configuration.
OL-20851-01