Cisco 6921 Administration Manual page 39

Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-9 Checklist for Configuring the Cisco Unified IP Phones 6921, 6941, and 6961 in Cisco Unified CM (continued)
Task Purpose
Add user information by configuring required fields.
10.
Required fields are indicated by an asterisk (*); for
example, User ID and last name.
Note Assign a password (for User Options web
pages) and PIN (for Cisco Extension Mobility
and Personal Directory).
Adds user information to the global directory for
Cisco Unified CM.
Associate a user to a user group.
11.
Assigns users a common list of roles and permissions
that apply to all users in a user group. Administrators
can manage user groups, roles, and permissions to
control the level of access (and, therefore, the level of
security) for system users.
Note In order for end users to access Cisco Unified
CM User Options, you must add users to the
standard Cisco CCM End Users group.
Associate a user with a phone (optional).
12.
Provides users with control over their phone such a
forwarding calls or adding speed-dial numbers or
services.
Some phones, such as those in conference
Note
rooms, do not have an associated user.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
OL-20851-01
Overview of Configuring and Installing Cisco Unified IP Phones
For More Information
For more information, see the Cisco Unified
Communications Manager Administration Guide,
User Configuration.
Note If your company uses a a Lightweight Directory
Access Protocol (LDAP) directory to store
information on users, you can install and
configure Cisco Unified Communications to use
your existing LDAP directory, refer to
the"Configuring Corporate Directories" section
on page 5-15. Once the Enable Synchronization
from the LDAP Server field is enabled, you will
not be able to add additional users from Cisco
Unified CM Administration.
Note If you want to add both the phone and user to the
Cisco Unified CM database at the same time, see
User/Phone Add Configurations
Unified Communications Manager
Administration Guide.
Refer to the following sections in the Cisco Unified
Communications Manager Administration Guide,
User Configuration and User Group
For more information, see the Cisco Unified
Communications Manager Administration Guide,
User Configuration.
End
in the Cisco
End
Configuration.
End
1-25