Status Menu; Status Messages Screen - Cisco 6921 Administration Manual

Status Menu

Table 7-1 Model Information Settings for the Cisco Unified IP Phone 6900 Series (continued)
Option Description
Active Load Version of firmware currently installed on the
phone.
Inactive Load Version of firmware installed on the phone,
but not currently running. The "Inactive
Load" label also displays the status of the
load, such as "Upgrade in Progress" or
"Upgrade Failed."
Last Upgrade Date of the most recent firmware upgrade.
Active Server IP address or name of the server to which the
phone is registered.
Stand-by Server IP address or name of the standby server.
Status Menu
To display the Status menu, press the Applications button and then select Administrator Settings >
Status. To exit the Status menu, press the Back
The Status menu includes theses options, which provide information about the phone and its operation:
•
•
•
•
•
•
•
•

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated.
You can access this screen at any time, even if the phone has not finished starting up.
the status messages that might appear. This table also includes actions you can take to address errors.
To display the Status Messages screen, follow these steps:
Procedure
Step 1 Press the Applications button.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
7-2
Chapter 7
Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see the
Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the
Call Statistics—Displays counters and statistics for the current call. For more information, see the
"Call Statistics Screen" section on page
Security Mode—Displays the Security Mode screen. For more information, see the
Configuration" section on page
Backlight On Time
Backlight On Duration
Backlight Idle Timeout
Days Backlight Not Active
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
softkey.
"Status Messages Screen" section on page
"Network Statistics Screen" section on page
7-8.
7-10.
7-2.
7-6.
"Security
Table 7-2 describes
OL-20851-01