Miscellaneous System Fields - Honeywell ADEMCO VISTA-12A Installation And Setup Manual

FIELD TITLE and DATA ENTRIES
Alarm Restores
*69
Send restore code (if fault cleared):
0 = at siren timeout (if restored) or at disarm
(whether restored or not)
1 = dynamically as the fault clears
2 = only after a disarm
Alarm Restore Report Code
*70
0 = disable; 1-F = see description above ∗59
Trouble Restore Report Code
*71
0 = disable; 1-F = see description above ∗59
Bypass Restore Report Code
*72
0 = disable; 1-F = see description above ∗59
AC Mains Restore Report Code
*73
0 = disable; 1-F = see description above ∗59
Low Battery Restore Report Code
*74
0 = disable; 1-F = see description above ∗59
RF Low Battery Restore Code
*75
0 = disable; 1-F = see description above ∗59
Test Restore Report Code
*76
0 = disable; 1-F = see description above ∗59

Miscellaneous System Fields

FIELD TITLE and DATA ENTRIES
Summer Time
*77
Start/End Month
0 = Disabled
1 = Jan
2 = Feb
3 = Mar
Summer Time
*78
Start/End Weekend
0 = disabled
1 = first
2 = second
3 = third
4 = April
# + 10 = Oct
# + 11 = Nov
# + 12 = Dec
4 = fourth
5 = last
6 = next to last
7 = third to last
EXPLANATION
Alarm restore message will be sent upon condition
selected.
Sent when an alarm zone is restored to its non-
faulted condition or at the times selected in field
*69.
Sent when a trouble in a zone is restored
Sent when a zone that has been bypassed is
unbypassed, either manually or when the
partition/system is disarmed.
Sent when AC mains has been restored after an AC
mains outage.
Sent when a system low-battery condition is
restored to normal.
Sent when a transmitter's low battery condition is
restored (i.e., new battery installed).
Sent when the Test mode is exited.
EXPLANATION
Enter the start and end month for summer time, if
applicable to the region.
Enter the start and end weekend for summer time,
if applicable to the region.
Data Field Programming
4-9