List Of Authorized Users: Configuration Acknowledge Message; List Of Authorized Users: Check The Configuration; Low Battery - Digicom 2G GSM Gateway Lift User Manual

Digicom 2g gsm gateway lift user's guide
Table of Contents

Advertisement

Available languages

Available languages

2G GSM Gateway Lift
3.1.2. LIST OF AUTHORIZED USERS: CONFIGURATION ACKNOWLEDGE
MESSAGE
When 2G GSM Gateway Lift receives a message, it will check if the message is coming from an authorized users, it will analyze the
message; otherwise the message will be ignored. If the message comes from an authorized user, but the text message is wrong, then
the device will answer with a NACK message. In case of correct configuration the device will answer with an ACK message.
If the list of phone numbers enabled to configure and manage the device is empty (confx), anyone can configure and manage
the device.
All the messages sent from 2G GSM Gateway Lift, included the ACK and NACK message, will start with an SMS index (Idx_Sms)
and a separation symbol (#). The index maximum value can be 255 then it will resume from 0.
Example:
12#*1#DIGICOM#ACK

3.1.3. LIST OF AUTHORIZED USERS: CHECK THE CONFIGURATION

To check the configuration of the phonebook it is sufficient to send the following message:
The user that requires the information will receive the answer in the same format, with the Sms index and hash (#) character.
Example:
13#*1#DIGICOM#+393351234567,+393409876543#+393351234567,+393409876543

3.2. LOW BATTERY

2G GSM Gateway Lift is supplied with an internal rechargeable battery, in case of black-out of main power, the device can operate
using the back-up battery. When the battery remains with about 90 - 60 minutes* autonomy, the device sends a first "Low Battery"
message.
If the black-out continues, before power off (about 30 - 5 minutes autonomy*), the device sends a second "Shutdown in progress"
message to inform the device is powering off.
The message is sent to the phone numbers configured in the authorized users list (destx).
* : The battery life depends on several factors, i.e. the device status (standby mode or talking mode), the operating temperature
of the device, the quality of GSM signal.
ENG3.2
*1?
Remote Control via SMS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents