Low Battery: Warning Messages; Configuration Reset; Device Reboot - Digicom 2G GSM Gateway Lift User Manual

2G GSM Gateway Lift

3.2.4. LOW BATTERY: WARNING MESSAGES

When the above mentioned situations occur, if 2G GSM Gateway Lift is correctly configured, it will send the following messages:
14#*B#DIGICOM#Battery Low
15#*B#DIGICOM#Shutdown in progress
Key of message Battery low: *B
* : The battery life depends on several factors, i.e. the device status (standby mode or talking mode), the operating temperature
of the device, the quality of GSM signal.

3.3. CONFIGURATION RESET

To recover the factory default configuration of *1 and *2 messages, it will be necessary to send the following SMS:
*9 # ID
ITEM
*9
#
ID
This command will restore all the default values of the SMS configuration.
Example:
*9#DIGICOM

3.4. DEVICE REBOOT

Authorized users can remote reboot the device with the following message:
After the reception of the message, the device answers with an ACK message then it re-boot the device for a new GSM network
searching.
Example:
18#RESET#DIGICOM#ACK
ENG3.4
(Approximately 90 - 60 minutes* of battery autonomy)
(Approximately 30 - 5 minutes* of battery autonomy)
DESCRIPTION
Message ket to recover the factory default configuration
Separation symbol
Device ID
RESET
Remote Control via SMS