Power Inputs - NETGEAR Trek PR2000 User Manual

Trek N300 Travel Router and Range Extender PR2000

Power Inputs

You can power the Trek with either AC current from a wall socket or a micro USB connection.
Move the slide switch to the Power Off position before plugging the Trek in to the wall
socket.
Use either of the following methods to power your Trek:
• AC power connection. Fold out the power prongs and plug the unit into an AC wall
outlet.
Figure 5. AC power connection
• Micro USB connection. Connect a micro USB cable to the unit and to a USB port on
another device.
Figure 6. Micro USB connection
Power plug
varies by county
Hardware Setup
13