NETGEAR Trek PR2000 User Manual page 16

CAUTION: Most public WiFI hotspots offer no security. NETGEAR recommends that you
do not send personal information over the Internet from your personal devices.
Figure 9. WiFi hotspot connection
To connect to a public WiFi hotspot:

1. Connect the Trek to a power source.
For more information, see
2. Turn on power to the Trek by moving the Internet via switch from the Power Off position to
the Wireless position.
3. Rotate the Trek's cover clockwise to orient the antenna.
For more information, see
4. Connect your computer or wireless device to the Trek's SSID, or connect your computer or
wireless device to the Trek's LAN port with an Ethernet cable.
5. Open a web browser on your computer, type www.routerlogin.net in the address field, and
press the Enter key.
If a login screen displays, enter admin for your user name and password for your
password. The user name and password are case-sensitive. Then click the OK button.
Trek N300 Travel Router and Range Extender PR2000
(Optional) Connect a USB device to the USB port
Power Inputs
Antenna Orientation
Hardware Setup
on page 13.
on page 14.
16