NETGEAR Trek PR2000 User Manual page 105

Trek N300 Travel Router and Range Extender PR2000
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Click the ADVANCED tab.
The following information displays:
• Name (SSID). The wireless network name (SSID) that the Trek uses.
• Region. The geographic region where the Trek is used. It might be illegal to use the
wireless features of the Trek in some parts of the world.
• Channel. The operating channel of the wireless port. The default channel is Auto.
When Auto is selected, the Trek finds the best operating channel available.
• Mode. The wireless communication mode: Up to 54 Mbps, Up to 150 Mbps (the
default), or Up to 300 Mbps.
• Wireless AP. Indicates whether the radio of the Trek is enabled. If the radio is not
enabled, the WiFi LED is off.
• Broadcast Name. Indicates whether the Trek is broadcasting its SSID.
• Wireless Isolation. Indicates whether wireless isolation is on or off. When it is off,
wireless clients (computers or wireless devices) that join the network can use the
Internet, but cannot access each other or access Ethernet devices on the network.
• Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for
this network.
Administration
105