NETGEAR Trek PR2000 User Manual page 38

Trek N300 Travel Router and Range Extender PR2000
5. Select BASIC > Internet.
6. Clear the Enable AP Mode check box.
The fields that display in the Internet Setup screen depend on whether your Internet
connection requires a login.
7. Select the Save as profile check box.
If you want to use your Trek in more than one type of Internet connection, a saved profile
lets you make connections more quickly.
8. In the field provided, enter a name for the profile.
Your saved profiles display on the Profile Settings screen after you click the Apply
button. For more information, see
9. Under Does your Internet connection require a login?, select one of the following radio
buttons:
• Yes. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No. Enter the account and domain names, only if needed.
These fields display when no login is required:
• Account Name (If required). Enter the account name provided by your ISP. This
might also be called the host name.
• Domain Name (If required). Enter the domain name provided by your ISP.
These fields display when your ISP requires a login:
• Internet Service Provider. Select PPPoE, L2TP, or PPTP.
• Login. The login name provided by your ISP. This login name is often an email
address.
• Password. The password that you use to log in to your ISP.
• Service Name (if Required). If your ISP provided a service name, enter it here.
Profile Settings on page 49.
genie BASIC Settings
38
Scroll to view
more settings