Wi-Fi Protected Setup Method - NETGEAR Trek PR2000 User Manual

Wi-Fi Protected Setup Method

Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to
a home network while maintaining security. To use WPS, make sure that all wireless devices
to be connected to the network are Wi-Fi certified and support WPS. During the connection
process, the client gets the security settings from the Trek so that every device in the network
has the same security settings.
To connect WiFi devices to your Trek with WPS:

1. Launch your browser from a computer or wireless device that is connected to the Trek.
2. Enter www.routerlogin.net or www.routerlogin.com in the web browser address bar.
The login screen displays.
3. Enter the Trek user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Click ADVANCED > WPS Wizard.
6. Click the Next button.
7. Select one of the following radio buttons:
• Push Button (recommended). Click the
Trek N300 Travel Router and Range Extender PR2000
Get Started with NETGEAR genie
button.
33