NETGEAR Trek PR2000 User Manual page 24

Trek N300 Travel Router and Range Extender PR2000
2. Locate the Trek near a window so that it has access to the cellular network.
3. Connect the Trek to a power source.
For more information, see
4. Turn on power to the Trek by moving the Internet via switch from the Power Off position to
the Wireless position.
5. Rotate the Trek's cover clockwise to orient the antenna.
For more information, see
6. Connect your computer or wireless device to the Trek's SSID, or connect your computer or
wireless device to the Trek's LAN port with an Ethernet cable.
7. Open a web browser on your computer, type www.routerlogin.net in the address field, and
press the Enter key.
If a login screen displays, enter admin for your user name and password for your
password. The user name and password are case-sensitive. Then click the OK button.
The Setup Wizard screen displays.
8. Click the Next button and follow the prompts of the Setup Wizard.
When requested, enter your cellular account information. When you are done, the
Congratulations screen displays.
The Trek is connected to the Internet.
9. (Optional) Connect your wireless devices to the Trek.
For more information, see
Power Inputs on page 13.
Antenna Orientation on page 14.
Add Wireless Devices or Computers to Your Trek
Hardware Setup
24
on page 32.