Orbi Router Front Led And Power Led Behavior - NETGEAR RBK762S User Manual

6. Reset button: Use the Reset button to restart (reboot) the router or reset the router
to its factory default settings:
• Restart the router: Press the Reset button for less than five seconds. The Power
LED lights solid amber and the router restarts.
• Reset the router to its factory default settings: Press and hold the Reset button
until the Power LED starts blinking amber. The router resets and returns to its
factory settings.
7. Power LED: For more information about the Power LED behavior, see Orbi router
front LED and Power LED behavior on page 9.

Orbi router front LED and Power LED behavior

The Orbi router includes a Router LED on the front and a Power LED on the back.
The following table describes the LED behavior for the Router LED on the front of the
router.
Table 1. Router LED behavior
LED color Description
Pulsing white The router is booting or someone pressed the Sync button.
Solid white The router is resetting to its factory default settings.
Solid magenta The router cannot connect to the Internet.
Off The router finished booting and is working normally.
The following table describes the LED behavior for the router's Power LED on the back
of the router.
Table 2. Power LED behavior
LED color Description
Solid green Power is on.
Solid amber The router is booting.
Blinking amber The router is resetting to its factory default settings.
Blinking red The router's firmware is corrupted.
Off Power is not supplied
Overview
Orbi Tri-band Mesh WiFi 6 System
9 User Manual