Rewind Setting; Figure 7.27: The 'Rewind Setting" Tab - Honeywell MAXPRO-Net Commissioning Manual

7.13.8

Rewind Setting

Rewind setting is set to Stop and Eject Mode, so that no rewind operation will be done
on Tape Change.
During automatic Tape change operations, this field specifies the time period (in
seconds) that should elapse from the sensing of the record status on the current bank of
VCRs to the beginning of Tape change operations on the next bank. Interblank delay is
set as 5 secs.
Rev. B

Figure 7.27: The 'Rewind Setting" Tab

7-50 HMXMC001013
31-Mar-06