Table of Contents
Advertisement
6.16 ERROR LOG, CONTINUED
36
Keyboard priority range error
37
Invalid keyboard identity for macro numeric input command
38
Invalid destination for keyboard macro numeric input command
39
Too many digits requested for keyboard macro numeric input
40
Invalid scan clear command
41
No dynamic macro timer available
42
User flag range error (0
43
Keyboard operator range error (0
44
User defined character range error, in direct comm port writes
45
Undefined comm port number, in direct comm. Port writes
46
Internal change network source
47
Internal change network source node command format error
48
Scan sequence entry number is out-of-range i.e.: greater than (99)
49
Error in command format received from a subrack/keyboard
50
Parity error in received data from a subrack/keyboard
51
Range error in Blank Channel command (valid 0 - 3 only)
52
Unknown Special WORD command. E.g.: <WARM-BOOT> etc.
53
Other errors detected during Cold/Warm Boot. Check ERRORLOG.
As well as the macro error number, details of the macro trail are also given in the Error
Log. The macro trail details the actual event that caused the macro to begin execution,
which is given as a 2-letter code and lists the system macro lines called prior to the
macro error occurring.
The event codes are listed in the table below:
Event Code
AS
AF
VS
VF
CB
WB
KI
KR
PE
NT
LN
LB
PE
SN
SF
Rev. B
Macro Error Definition Table (cont.)
8 only)
Description of Event
External alarm start macro
External alarm finish macro
Video input start macro
Video input finish macro
System cold boot macro
System warm boot macro
Keyboard key intercept macro (key-pressed)
Keyboard key intercept macro (key-released)
Keyboard post event macro (executed)
Network macro received from another MAXPRO-Net network node
Local network macro (internal action request type)
Local network macro (status broadcast type)
Post-event macro (for a keyboard)
Operator sign-on macro
Operator sign-off macro
100 only)
6-57
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
