Table of Contents
Advertisement
The total number of video outputs allowed in a MAXPRO-Net system is 999.
Enable Text Line
Time Out
Net Device
Default Video
Input
Rev. B
Video Outputs
Selecting the ENABLE TEXT LINE field allows for configuration of the text
lines to be displayed on the current video output device.
Click on the check boxes beside the selections to toggle their status. A
check mark in the box indicates it is selected. Click on OK when
selections are as desired. To Deselect All, left mouse click on Deselect
All. To exit the Enable Text Line dialog box without making any changes,
click on Cancel.
When a video monitor (or other video output device) is not being used it
is sometimes desirable to remove the displayed picture from the monitor,
leaving a blank screen. The system will try to select the BLANK video
input defined in the video input table so a Black Video Source could be
displayed. If no BLANK input is defined, then the system will only remove
the text insertion window, leaving the actual picture on display.
The display time-out period can be set from 1 – 999 seconds. Enter a
zero (0) in this field if the display time out function is not required.
When the current video output device is actually connected to another
MAXPRO-Net system within a network configuration, the NET DEVICE
field is used to specify the exact location and reference for the video
output device.
e.g.
#03:M12
LINK
For more details, please refer to the NETWORKING section of the
Commissioning Manual.
This field allows definition of the video input device to be selected to the
current video output device when the MAXPRO-Net system is first
powered up.
Enter the video input Device Type (as a single letter) followed by the
logical device number 1 – 9999 of the video input device required and
press Enter on the keyboard.
e.g.
C12 .. camera 12 or
C999 .. camera 999 or
R23 .. VCR 23
Note: The selected video input must be of a suitable source
group for this video output channel.
the actual monitor resides on network node 3
and is defined there as monitor 12.
signifies that status changes and actions
performed on the current video output device
will be broadcast on the network.
6-16
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
