Appendix A: Macros; Macro Error Messages; Table A.1: Macro Error Definition Table - Honeywell MAXPRO-Net Commissioning Manual

A.1

MACRO ERROR MESSAGES

After commissioning, the video system will probably need to be programmed for alarm
response and other automatic operations. The video system will report any detected
errors as a Macro error number.
Macro errors are displayed as a warning message on the currently selected monitor
display for a period of two seconds following the error condition occurring. It is also
viewed from Setmax ERRORLOG Tab. The MaxMon utility can be used to view Macro
Execution, together with a macro trail to help identify the cause of the macro error.
Use the following table to identify the reported Macro error numbers.
01 Format error in extended command
02 Format error in conditional command
03 Unknown command in expression evaluation
04 Unknown command in update expression
05 Numeric variable range error
06 Scan sequence range error
07 External alarm range error
08 Auxiliary control output range error
09 Invalid numeric evaluation error
10 Macro timer range error
11 Macro timer command error
12 Macro timer period error
13 System macro range error
14 Unknown video output channel
15 Unknown video input source
16 Invalid external alarm control logic
17 Invalid auxiliary output control logic
18 Invalid camera disable logic
19 Invalid PTZ speed
20 Unknown system constant error
21 Unknown text message command error
22 Invalid operator sign used with commands
23 Invalid keyboard identification number
24 Invalid alarm stack entry i.e.: not an alarm macro
25 Invalid alarm display group (1
26 Macro string exceeds 255 characters
27 Conditional statement missing closed brackets
28 Invalid real time clock time or date definition
29 Invalid video source command
30 String variable command format error
31 String variable range error
Rev. B
APPENDIX A:
MACROS

Table A.1: Macro Error Definition Table

50) only
A-1 HMXMC001013
31-Mar-06