Table of Contents
Advertisement
7.13.4
Logging VCR
The Logging VCR1, VCR2, VCR 3...are defined in the Logging VCR tab of SetMax.
These VCRs are connected to Bank 1. When Tape change sequencing is to be initiated
manually, the Manual Tape Change field is used to define the external alarm input that
will be used to begin the Tape change operations on this bank. Upon entry of a value
into this field, Setmax automatically adds the appropriate definitions to the 'External
Alarm Inputs' table.
The range of valid entries is 1 – 9999. The default value is 0 indicating Tape change
operations are automatically initiated. When you have completed editing the dedicated
VCR properties page, click on the OK button.
Rev. B
Figure 7.23: The 'Logging VCR' Tab
7-44
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
