Verifying The Ip Settings; Verifying The Settings Using Operator Panel; Verifying The Settings Using System Settings Report; Verifying The Settings Using Ping Command - Dell C2665dnf User Manual

Verifying the IP Settings

You can confirm the settings by using the operator panel, printing the system settings report, or using the ping
command.

Verifying the Settings Using Operator Panel

1 Press the
(Information) button.
2 Tap About This MFP.
3 Tap the Network tab.
4 Verify the IP address displayed in IP(v4) Address.

Verifying the Settings Using System Settings Report

1 Print the system settings report.
For details about how to print a system settings report, see "Report / List."
2 Verify the correct IP address, subnet mask, and gateway address are listed in the system settings report under
Network (Wired) or Network (Wireless).
If the IP address shows 0.0.0.0 (the factory default), an IP address has not been assigned. To assign one for your
printer, see "Assigning an IP Address."

Verifying the Settings Using Ping Command

Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type ping
followed by the new IP address (for example, 192.168.0.11):
ping 192.168.0.11
If the printer is active on the network, you will receive a reply.
73
Setting the IP Address