Setting The Information Necessary To Access The Mail Server - Dell C2665dnf User Manual

3 Click Basic Information.
4 Set Administrator E-Mail Address. In the Administrator E-Mail Address text box. Up to 63 alphanumeric
characters, periods, hyphens, underscores, and at symbols (@) can be used.
5 Click Apply New Settings.

Setting the Information Necessary to Access the Mail Server

To make the printer to send an e-mail, follow the steps below:
1 Launch the Dell Printer Configuration Web Tool.
Open the web browser.
a
Enter the IP address of your printer in the web browser.
b
See "Dell™ Printer Configuration Web Tool."
2 Click E-Mail Server Settings Overview.
3 Set the mail server information under E-Mail Server.
NOTE:
In this procedure, the server settings for a Gmail account are used as an example. The server settings will differ for
each e-mail service.
NOTE:
Information about the Gmail account is based on the information as of October 2013. For the latest information, visit
the homepage of Gmail.
In the Primary SMTP Gateway text box, set the primary SMTP gateway.
a
For example: smtp.gmail.com
In the SMTP Port Number text box, enter the SMTP port number. This must be 25,587 or between 5,000 and
b
65,535.
For example: 587
In the E-Mail Send Authentication drop-down menu, specify the authentication method for outgoing e-mail.
c
For example: SMTP_Auth (Auto)
In the SMTP Login User text box, set the SMTP login user. Up to 63 alphanumeric characters, periods,
d
hyphens, underscores, and at symbols (@) can be used. If specifying more than one address, separate them
using commas.
For example: aaaa@gmail.com
363
Scanning