Auto Correct - Dell C2665dnf User Manual

Color Regi Chart Print
Enter Number LY
LM
LC
RY
RM
RC
PY
PM
PC
NOTE:
Ensure that you remove the paper from the single sheet feeder before performing
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Values:
User Fax Section
User Scan Section
User Account Section
System Section
Initialize Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Reset Fusing Unit
Purpose:
To initialize the life counter of the fusing unit. After replacing the fusing unit, be sure to initialize its life counter.
Reset Transfer Belt Unit
Purpose:
To initialize the life counter of the transfer belt unit. After replacing the transfer belt unit, be sure to initialize its life
counter.
252
Understanding the Printer Menus
Available Range:
-9 to +9
Available Range:
-9 to +9
Available Range:
-9 to +9
Initialize Initializes the fax number entries in the Address Book.
Initialize Initializes the e-mail and server address entries in the Address Book.
Initialize Initializes the user registration information.
Initialize Initializes the system parameters.
Prints a color registration chart. The color registration chart
prints a lattice pattern of yellow, magenta, and cyan lines.
On the chart, find the values on the right side that are next
to the line that is perfectly straight for each of the three
colors. If the value for this line is 0, color registration
adjustment is not required. If the value for this line is any
value other than 0, specify the adjustment values under
lateral adjustment and process adjustment in
.
Number
Sets lateral (perpendicular to paper feed direction) and
process (paper feed direction) color adjustment values
individually for Yellow, Magenta, and Cyan. Enter a number
in order of lateral adjustment (left), lateral adjustment
(right), and process adjustment. Select
settings.

Auto Correct

Enter
to save all the
OK
.