Hookswitch - Cisco 6901 User Giude

Hookswitch

1
Hold button
2
3 Redial button
Line button
4
Volume button Controls the handset and the ringer volume (on hook).
5
Keypad
6
Handset with
7
light strip
Hookswitch
The hookswitch button is located on the cradle rest of your phone. You can press and quickly release
the hookswitch button to activate features (hookflash) on your phone. Your administrator can set up
the hookswitch timer.
4
Activates the features (hookflash) on your phone.
Places a connected call on hold.
Dials the last dialed number.
Allows you to pick up a second incoming call. The Line button LED indicates
the call status.
Allows you to answer a ringing call and swap between two calls on the same
line. Also, you can use the line button to create a new call when the phone is
idle. The LED associated with the line button lights up to reflect the line status.
Color LEDs indicate the line state:
• Green, steady—Active call
• Green, flashing—Held call
• Amber, Flashing—Incoming call
• Amber, steady—Call forward all activated
• Red, steady—Remote line in use (shared line)
• Red, flashing—Remote line on hold
Allows you to dial phone numbers.
Lights up to indicate a ringing call (flashing red) or a new voice message
(steady red).
OL-24581-01