Power-Saving Mode - Cisco 6901 User Giude

1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
1
Rotate the tab 180 degrees.
2
Hold the tab between two fingers, with the corner notches facing you. Make sure the tab lines
3
up evenly with the slot in the handset cradle.
4 Press the tab evenly into the slot. An extension protrudes from the top of the rotated tab. Return
the handset to the handset rest.

Power-Saving Mode

Your phone supports the Cisco EnergyWise (EW) program. Your system administrator sets up sleep
(power down) and wake (power up) times for your phone to save energy.
If the power saving mode is enabled by your system administrator, you hear your ringtone play. The
ringtone plays according to the following schedule:
• At 10 minutes before power down, the ringtone plays four times
• At 7 minutes before power down, the ringtone plays four times
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
2 3
Your Phone
4
13