Set Up, View, Or Change Web Dialer Preferences; Sign Out Of Web Dialer - Cisco 6901 User Giude

3. Select the number that you want to dial.
4. If this is your first time using Web Dialer, review the preferences on the Make Call page.
5. Select Dial.
The call is now placed on your phone.
6. To end a call, select Hang up or hang up from your phone.

Set Up, View, or Change Web Dialer Preferences

(Cisco Unified IP Phone 6911 only)
1. Initiate a call using Web Dialer to access the Make Call page.
The Make Call page displays the first time that you use WebDialer (after you select the number
that you want to dial).
2. Select one of the following options from the Make Call page:
Preferred language—Determines the language used for Web Dialer settings and prompts.
–
Use preferred device—Identifies the Cisco Unified IP Phone (Calling device) and directory
–
number (Calling line) that you will use to place Web Dialer calls. If you have one phone with
a single line, the appropriate phone and line are automatically selected. Otherwise, choose a
phone and/or line. If you have more than one phone of the same type, it will be specified by
device type and MAC address.
Do not display call confirmation—If selected, the Web Dialer Make Call page will not display
–
the next time Web Dialer is used. Calls will automatically be dialed after clicking on a contact
from the Cisco Directory.
Disable Auto Close—If selected, the call window does not close automatically after fifteen
–
seconds.

Sign Out of Web Dialer

(Cisco Unified IP Phone 6911 only)
Select the Sign Out icon
28
in the Make Call or Hang Up page.
OL-24581-01