Installing The Cisco Unified Ip Phone - Cisco 3951 Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Installing the Cisco Unified IP Phone

Task
Connect the handset to the
1.
Handset port.
2. Connect the power supply to
the Cisco DC Adapter port.
3. Connect a Category 3 or 5
straight-through Ethernet cable
from the switch to the network
port.
OL-10969-01
You must connect the Cisco Unified IP Phone to the network and to a power
source before using it. See
connections.
Notes
—
Optional.
—
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
Installing the Cisco Unified IP Phone
Figure 3-1 for a graphical representation of the
Reference
See
page 3-5
See the
Cisco Unified IP Phone"
section on page 2-3
guidelines.
See the
on page 3-5
the"Handset" section on
for guidelines.
"Providing Power to the
for
"Network Port" section
for guidelines.
3-7