Configuring Network Parameters Using The Cisco Unified Ip Phone - Cisco 3951 Administration Manual

What Features are Supported on the Cisco Unified SIP Phone 3951?
Configuring Network Parameters Using the Cisco Unified IP
Phone
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
1-8
"Telephony Features Available for the Cisco Unified IP Phone" section on
page 5-1, and refer to the Cisco Unified CallManager documentation for
additional information.
For more information about the Cisco Unified CallManager Administration
application, refer to Cisco Unified CallManager documentation, including Cisco
Unified CallManager Administration Guide. You can also use the
context-sensitive help available within the application for guidance.
You can access the complete Cisco Unified CallManager documentation suite at
this location:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/index.htm
Related Topic
• Telephony Features Available for the Cisco Unified IP Phone, page 5-1
You can configure parameters such as DHCP, TFTP, and IP settings on the phone
itself. You can also obtain statistics about a current call or firmware versions on
the phone.
For more information about configuring features and viewing statistics from the
phone, see Chapter 4, "Configuring Settings on the Cisco Unified IP Phone"
see Chapter 6, "Viewing Status, Statistics, and Firmware Information on the Cisco
Unified IP Phone."
Related Topics
Configuring Settings on the Cisco Unified IP Phone, page 4-1
•
Troubleshooting and Maintenance, page 7-1
•
Chapter 1 An Overview of the Cisco Unified IP Phone
and
OL-10969-01