Upgrading Firmware From A File; Resetting Your Device - NETGEAR Zing User Manual

To get the update from the About screen:
1. Tap > Settings > More > About.
2. Go to the last page and tap Software Updates.
3. Tap Check for updates now
4. If an update is available, tap Update Now to load the update immediately
In the Zing Manager (via the hotspot URL)
There are two ways to get the software update from the web page. You can get it from the Alert
message, or from the Software and Reset page.
To get the update from the Alert:
1. Log in to the home page. (See
2. In the Alert message for the available update, click Install Now.
3. Follow the onscreen instructions.
To get the update from the Software and Reset page:
1. Log in to the home page. (See
2. Click Settings > General > Software and Reset.
3. Click Check for update. If an update is available, an Install Now button appears.
4. Click Install Now.
5. Click Continue.

Upgrading Firmware From a File

A one-click tool may be available for upgrading firmware from a file in enterprise environments.
Contact your wireless service provider for details.

Resetting Your Device

In some cases, you may want or need to clear your account information to use your device with
another account, reset most settings (except for your account and network activation), or reset
your device to its factory default settings.
You can clear these settings from your device's Reset screen, or from the Zing Manager's
Software and Reset page.
Software and Reset
Logging In as an Administrator.)
Logging In as an Administrator.)
108