HNB-GW Service Configuration Procedures
Notes:
<
<
between HNB-GW and HNB.
<
characteristics of Iuh interface.
<
U tunnel over Iuh interface towards HNB.
<
connectivity with HNB-GW over Iuh. This is a mandatory command to use to make HNB-GW communicating
with MSC/VLR through IuCS-over-IP tunnel.
<
allocate RTP end point address in HNB-GW service over Iuh interface.
Security Gateway and Crypto map Template Configuration
Use the following example to configure the IPsec profile and Crypto map template enabling SeGW on HNB-GW for
IPsec tunneling.
OL-22991-01
> is name of the source context in which HNB-GW service is configured.
> is name of the HNB-GW service which is to be configured for used for Iuh reference
> is the SCTP IP address on which is HNB will communicate with HNB-GW and has
> is name of the GTP-U service configured in <
> is the same as
> is name of the IP pool configured in source context named <
which is mapped by HNB with RTP streams for
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
HNB GW Service Configuration ▀
> to provide GTP-
> to