Cisco ASR 5000 Series Administration Manual page 65

HNB-GW Service Configuration Procedures
HNB GW Service Configuration ▀
The output of this command given below is a concise listing of HNB-GW service parameter settings as shown in the
sample output displayed. In this example, an HNB-GW service called was configured and you can
see some parameters configured as default.
Step 2
Verify configuration errors of your HNB-GW services by entering the following command in Exec Mode:
Cisco ASR 5000 Series 3G Home NodeB Gateway Administration Guide ▄
OL-22991-01