NETGEAR Wireless-N 150 User Manual page 28

Figure 2-2
3. Make any changes that are needed, and then click Save or click Apply to allow your changes
to take effect immediately. The settings are explained in
4. Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID and channel that you
specified in the router. Check that they have a wireless link and can obtain an IP address by
DHCP from the wireless modem router.
Once your computers have basic wireless connectivity to the wireless modem router, you can
configure the advanced wireless security functions of the firewall.
Configuring Your Wireless Network and Security Settings
Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
v1.1, January 2010
Table 2-1 on page 2-6.
2-5