NETGEAR Wireless-N 150 User Manual page 61

Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
Table 4-1. Router Status Fields
Field
Account Name
Firmware Version
MAC Address
IP Address
Network Type
IP Subnet Mask This field displays the IP subnet mask being used by the Internet
ADSL Port
Gateway IP
Address
Domain Name
Server
MAC Address
IP Address
LAN Port
DHCP
(local ports)
IP Subnet Mask This field displays the IP subnet mask being used by the local (LAN)
ADSL Firmware
Modem
Version
Modem Status
DownStream
Connection
Speed
UpStream
Connection
Speed
VPI
VCI
4-6
Description
The host name assigned to the wireless modem router in the Basic
Settings screen.
The wireless modem router firmware version.
The Ethernet MAC address used by the Internet (ADSL) port.
The IP address used by the Internet (ADSL) port. If no address is
shown, the wireless modem router cannot connect to the Internet.
The network type depends upon your ISP.
(ADSL) port of the wireless modem router.
IP address used as a gateway to the Internet for computers configured
to use DHCP.
This field displays the DNS server IP addresses being used by the
wireless modem router. These addresses are usually obtained
dynamically from the ISP.
This field displays the Ethernet MAC address being used by the local
(LAN) port of the wireless modem router.
This field displays the IP address being used by the local (LAN) port of
the wireless modem router. The default is 192.168.0.1.
If Off, the wireless modem router does not assign IP addresses to PCs
on the LAN.
If On, the wireless modem router does assign IP addresses to PCs on
the LAN.
port of the wireless modem router. The default is 255.255.255.0.
The version of the firmware.
The connection status of the modem.
The speed at which the modem is receiving data from the ADSL line.
The speed at which the modem is transmitting data to the ADSL line.
The Virtual Path Identifier setting.
The Virtual Channel Identifier setting.
v1.1, January 2010
Managing Your Network