Configuring Your Wireless Network; And Security Settings; Planning Your Wireless Network - NETGEAR Wireless-N 150 User Manual

This chapter describes how to configure the wireless features of your wireless modem router.For a
wireless connection, the SSID, also called the wireless network name, and the wireless security
setting must be the same for the modem router and wireless computers or wireless adapters.
NETGEAR strongly recommends that you use wireless security.
Warning: Computers can connect wirelessly at a range of several hundred feet. This can
allow others outside of your immediate area to access your network.
This chapter includes:
• "Planning Your Wireless
• "Manually Configuring Your Wireless Network" on page
• "Manually Configuring Your Wireless Security" on page
• "Using Push 'N' Connect (WPS) to Configure Your Wireless Network and Security" on
page 2-13

Planning Your Wireless Network

For compliance and compatibility between similar products in your area, the operating channel
and region must be set correctly.
To configure the wireless network, you can either specify the wireless settings, or you can use
Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/WPA2 security.
• To manually configure the wireless settings, you must know the following:
– SSID. The default SSID for the modem router is NETGEAR.
– The wireless mode (802.11n, 802.11g, or 802.11b) that each wireless adapter supports.
– Wireless security option. To successfully implement wireless security, check each wireless
adapter to determine which wireless security option it supports.

Configuring Your Wireless Network

Network"
v1.1, January 2010

and Security Settings

2-4"
2-7"
Chapter 2
2-1