NETGEAR Wireless-N 150 User Manual page 20

Table 1-2. Basic Settings screen fields
Settings
Does Your ISP Require a Login?
These fields Account Name
appear only if no (If required)
login is required.
Domain Name
(If required)
These fields Encapsulation
appear only if
your ISP
Login
requires a login.
Password
Idle Timeout (In minutes) If you want to change the login time-out, enter a new value in
Internet IP
Address
This field appears only if
no login is required.
Domain Name Server (DNS) Address
Connecting Your Wireless Modem Router to the Internet
Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
Description
• Yes
• No
Enter the account name provided by your ISP. This might also
be called the host name.
Enter the domain name provided by your ISP.
• PPPoE (PPP over Ethernet)
• PPPoA (PPP over ATM)
The login name provided by your ISP. This is often an e-mail
address.
The password that you use to log in to your ISP.
minutes. This determines how long the wireless modem router
keeps the Internet connection active after there is no Internet
activity from the LAN. Entering a value of 0 (zero) means
never log out.
• Get Dynamically from ISP. Your ISP uses DHCP to assign
your IP address. Your ISP automatically assigns these
addresses.
• Use Static IP Address. Enter the IP address that your ISP
assigned. Also enter the IP subnet mask and the gateway IP
address. The gateway is the ISP's wireless modem router to
which your wireless modem router will connect.
• Use IP Over ATM (IPoA). Your ISP uses Classical IP
addresses (RFC 1577). Enter the IP address, IP subnet
mask, and gateway IP addresses that your ISP assigned.
The DNS server is used to look up site addresses based on
their names.
• Get Automatically from ISP. Your ISP uses DHCP to
assign your DNS servers. Your ISP automatically assigns
this address.
• Use These DNS Servers. If you know that your ISP does
not automatically transmit DNS addresses to the wireless
modem router during login, select this option, and enter the
IP address of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it also.
v1.1, January 2010
1-9