Transfer - GE 15339430 User Manual

Problem
Incoming voice too low
or none at all.
Indicator and tone
feedback flutter when
dialing in pulse mode
Memory dialing
doesn't work
Battery LOW indicator
blinks or is solid
Intercom does not
function correctly
Transfer does not
function correctly
Display reads Addr-
Solution
• Check setting of volume control.
• This is normal as power is fluctuating as phone dials.
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure the pulse/tone mode is programmed correctly.
• The 9V battery needs replacing or is not installed.
• Make sure lines 1 and 2 are connected properly and
common to all phones on the system.
• Make sure all station addresses involved have been
assigned.
• Make sure lines 1 and 2 are connected properly and
common to all phones on the system.
• Check the connections for lines 3 and 4.
• Make sure the extension number has been programmed for
lines 3 and 4.
• The station address needs to be re-assigned due to a
duplicate station address in the system. See "Changing the
Station Address".
41