Ast Umber; I N Use Indicator; Auto Standby Channelb; Call Transfer - GE SPACEMAKER 26976 User Manual

C T
ALL RANSFER
1. While the handset is ON (in TALK mode), press the speaker button on
the Spacemaker® speakerphone to join the call.
2. Hang up the handset by pressing the TALK/CALLBACK button, or place
the handset in the charge cradle.
L N
AST UMBER
Three ways to redial the last number you dialed:
1. When the phone is OFF (not in TALK mode), press REDIAL button to
display last number dialed, press TALK/CALLBACK to dial.
2. While the phone is ON, press the REDIAL button to immediately redial
the last number you dialed (up to 32 digits).
3. If you get a busy signal and want to keep dialing the number, just press
REDIAL again (you don't have to turn the phone off and back on).
F
LASH
Use the flash/program button to activate custom calling services such
as call waiting or call transfer, which are available through your local
phone company.
TIP: Don't use the TALK/CALLBACK button to activate custom
calling services such as call waiting, or you'll hang up the phone.
I U I
N SE NDICATOR
The page/in use indicator at the wall base unit is lit when the phone is ON. It
flashes when you receive a call or when the page button is pressed.
A S
UTO TANDBY
Placing the handset into the Spacemaker® charge cradle while the
handset is ON (in TALK mode) will automatically hangs up the handset.
C B
HANNEL
While talking, you might need to manually change the channel in order to
get rid of static. Press and release the channel/delete button to advance to
the next channel. The current channel number appears on the left side of
the display.
24
R
EDIAL
L
IGHT
UTTON