Wall Mount Installation; Handset Hook - GE 15339430 User Manual

W M
ALL OUNT
1. Turn the handset hook 180º until it
clicks into place.
2. Connect one end of the telephone
line cord to the jack on the back of
the phone labeled LINE 1,2. For full
4-line use, connect a line cord to the
LINE 3,4 jack. Thread the LINE 1,2
line cord through the hole in the
wall mount bracket. Insert the wall
mount bracket onto the bottom of
the base unit by lining up the tabs,
making sure to route the AC power
cord and the LINE 3,4 line cord into
the slot at the bottom of the bracket.
Snap it into place. Connect the LINE
1,2 and LINE 3,4 line cords to their
respective wall jacks.
3. Hold the phone against the wall
plate (not included) so that the posts
on the wall plate slide into the
keyholes on the wall mount bracket.
Slide the phone down firmly so that
it locks securely into place.
I
NSTALLATION
1
PAGE
STORE IN
1
5
9
13
2
3
9