Setting U P Your Station Address; Memory Buttons; Button - GE 15339430 User Manual

S U
ETTING
Your phone has the ability to be set up as either a 2-9451 (the default), or a
2-9450. If you have an existing 2-9450 system, this phone can be set to be
fully compatible with your system. See "Changing the Phone to a 2-9450
Model".
VERY IMPORTANT: In order to have full system operation of your phone
(i.e. intercom, transfer, page, etc.), lines 1 and 2 must be connected and
common to all phones connected to the system. Only other 2-9451 or 2-9450
models are compatible for full system operation. Also, the telephone lines
must be connected before AC power is connected. The phone may not install
properly, otherwise.
The display reads Addr- .
1. Enter the station address number you want
to assign (01-16) or press the
corresponding memory button. The display
indicates what station you have entered.
2. Press the # key to confirm.The INTERCOM
indicator flashes red as it checks the
system line connections and station
address. If the line cords are connected
properly and the station address is valid,
you will hear a confirmation tone. This
indicates that the station address has been
successfully assigned.
Y S
P OUR TATION
A
DDRESS
STORE IN TIMER
1
5
9
13
BUSY REDIAL
PRIVACY
VOLUME
HEADSET
3 1234
REDIAL EXT.
TONE
DATA PORT LINE NUMBER
TIME SET MEMO REVIEW LOWER
2 3 4
6 7 8
10 11 12
14 15 16
FLASH PAUSE TRANSFER CONF CALL
1 2 3
ABC DEF LINE 4
4 5 6
LINE 3
GHI JKL MNO
7 8 9
LINE 2
PQRS TUV WXYZ
* 0 #
LINE 1
TONE OPER
MUTE SPEAKERPHONE HOLD INTERCOM
INTERCOM
indicator
11